|
Specialist Sub-contract Sheet Metal Workers |
|
|
|
||
|
Specialist Sub-contract Sheet Metal Workers |
|
|
|
||
|
We carry a wide range of tooling for our Amada Aries 245 CNC Punch Press. The table below shows our standard punches. In addition, we can offer a comprehensive tool-making service for special requirements. |
| 1.7 | 2.0 | 2.05 | 2.35 | 2.5 | 2.7 | 2.9 | 3.0 | 3.05 | 3.1 | 3.2 | 3.3 |
| 3.5 | 3.6 | 3.75 | 4.0 | 4.05 | 4.2 | 4.4 | 4.5 | 4.6 | 4.8 | 5.0 | 5.1 |
| 5.2 | 5.4 | 5.5 | 6.0 | 6.05 | 6.1 | 6.03 | 6.35 | 6.5 | 6.6 | 6.75 | 7.0 |
| 7.2 | 7.4 | 7.55 | 7.7 | 8.0 | 8.2 | 8.5 | 8.75 | 9.0 | 9.25 | 9.4 | 10.0 |
| 10.5 | 11.0 | 11.2 | 11.5 | 12.0 | 12.3 | 12.6 | 12.7 | 13.0 | 13.3 | 14.0 | 14.5 |
| 15.0 | 15.3 | 16.0 | 16.2 | 16.5 | 17.0 | 18.0 | 18.5 | 19.0 | 20.0 | 20.3 | 20.7 |
| 21.43 | 22.0 | 22.2 | 23.0 | 24.05 | 24.13 | 25.0 | 25.4 | 28.0 | 28.5 | 30.0 | 31.0 |
| 34.92 | 42.0 | 46.0 | 52.55 | 62.1- |
- |
- |
- |
- |
|||
|
3.2 |
5.0 |
5.5 |
6.0 |
6.35 |
7.62 |
7.95 |
8.5 |
9.0 |
9.5 |
10.0 |
12.0 |
|
12.6 |
12.9 |
13.5 |
14.0 |
15.0 |
19.5 |
20.0 |
40.0 |
- |
- |
- |
- |
| Rectangular Punches | ||||||
| 2.80 x 1.40 | 4.00 x 3.00 | 4.70 x 2.48 | 5.00 x 2.00 | 5.00 x 3.00 | 5.30 x 7.80 | 5.66 x 3.07 |
| 5.30 x 7.80 | 5.80 x 1.20 | 6.40 x 1.40 | 6.35 x 4.35 | 7.40 x 1.10 | 7.40 x 1.60 | 7.50 x 2.55 |
| 7.50 x 5.00 | 7.90 x 6.35 | 8.00 x 2.50 | 8.00 x 5.00 | 8.00 x 5.70 | 8.20 x 2.20 | 9.00 x 6.40 |
| 9.53 x 3.18 | 10.00 x 4.70 | 10.00 x 6.4 | 10.00 x 6.80 | 10.00 x 7.50 | 10.70 x 6.20 | 11.10 x 1.75 |
| 12.35 x 6.7 | 12.7 x 3.18 | 13.70 x 13.13 | 14.00 x 1.60 | 14.00 x 2.00 | 14.60 x 4.00 | 14.60 x 40 |
| 14.00 x 11.30 | 15.00 x 3.00 | 15.70 x 10.80 | 16.30 x 14.30 | 16.3 x 13.83 | 16.00 x 5.50 | 17.00 x 2.50 |
| 19.00 x 4.00 | 19.00 x 12.70 | 20.00 x 2.00 | 23.66 x 9.24 | 25.00 x 3.00 | 25.00 x 4.00 | 25.00 x 9.00 |
| 27.00 x 7.00 | 28.00 x 11.00 | 30.00 x 4.50 | 30.00 x 6.00 | 30.00 x 5.00 | 30.00 x 8.00 | 30.00 x 15.60 |
| 33.00 x 18.00 | 60.00 x 6.00 | .. | .. | .. | .. | .. |
| Obround Punches | ||||||
| 3.00 x 2.10 | 4.20 x 3.30 | 4.30 x 26.80 | 4.50 x 2.50 | 5.00 x 3.75 | 5.15 x 3.15 | 5.50 x 3.05 |
| 5.40 x 3.40 | 5.50 x 3.20 | 5.60 x 4.30 | 5.70 x 2.85 | 6.00 x 4.00 | 6.00 x 4.70 | 6.00 x 18.70 |
| 6.35 x 3.12 | 6.50 x 3.50 | 7.00 x 2.00 | 8.00 x 1.50 | 8.00 x 20.70 | 8.10 x 4.10 | 8.00 x 3.50 |
| 8.15 x 6.15 | 8.50 x 2.70 | 8.50 x 4.50 | 9.00 x 7.00 | 9.00 x 3.20 | 10.00 x 2.00 | 10.00 x 5.00 |
| 10.00 x 6.00 | 10.00 x 26.8 | 10.30 x 6.80 | 10.40 x 30.00 | 10.80 x 6.00 | 11.00 x 6.35 | 12.50 x 5.00 |
| 12.00 x 7.00 | 12.70 x 5.50 | 14.10 x 3.00 | 15.00 x 3.80 | 15.00 x 7.00 | 15.75 x 3.50 | 17.00 x 2.50 |
| 17.00 x 4.50 | 20.00 x 3.00 | 20.00 x 3.50 | 20.00 x 6.50 | 22.00 x 40.0 | 22.00 x 6.00 | 25.00 x 4.00 |
| 25.00 x 5.00 | 25.00 x 6.35 | 30.00 x 3.00 | 30.00 x 4.82 | 30.00 x 7.90 | 30.50 x 13.00 | 31.70 x 3.50- |
| Single D Punches | ||||||
| 6.40 x 5.90 | 9.70 x 8.90 | 11.30 x 10.50 | 12.70 x 11.80 | 12.83 x 12.25 | 16.00 x 15.25 | 17.10 x 16.10 |
| 20.80 x 19.40 | . | . | . | . | . | . |
| Double D Punches | ||||||
| 4.00 x 2.95 | 5.10 x 4.10 | 5.90 x 3.30 | 6.20 x 5.2AF | 6.50 x 5.40 | 8.2 x 7.10 AF | 9.50 x 8.70 |
| 9.78 x 7.90 | 10.20 x 8.20 | 10.40 x 7.50 | 12.00 x 11.00 | 12.70 x 11.40 | 12.70 x 11.80 | 15.00 x 13.50 |
| 15.90 x 14.00 | 16.00 x 13.00 | 16.00 x 14.70 | 19.13 x 16.60 | 26.00 x 23.00 | - | |
| D-type connector (9, 15, 26-way) | 19.30 x 11.30 Trapezoid |
| 3.0 Countersink | 19.80 x 11.80 Trapezoid R3.2 corners |
| 3.0 Semi-shear (Produces locating "pip" in mating parts) | 20.40 x 11.40 Trapezoid |
| Bridge Louvre (for PCB card guides and retainers) | 20.60 x 9.50 Trapezoid |
| Special | 5.00 Rad. Cruciform |
| Special | 8.00 x 42.00 Rectangle with 1.5 Rads. |
| Special | 8.50 x 16.00 Rectangle with 3.0 Rads. |
| Special | 10.40 x 30.00 Rectangle with 1.5 Rads. |
| Special | 10.00 x 19.00 Rectangle with 3.0 Rads. & 7.7 Dia. |
|
|
Home | Facilities | Expertise | Samples | Tooling | Finding Us | E-Mail |
